Commercial service
Commercial door closers in Ottawa
A door closer controls how a door shuts, which matters more than it sounds.
613.801.8531
Call 24/7 — we answer
Same day
Typical arrival in Ottawa
Quoted
Typical starting price
Insured
Insured and bonded, 12+ years
How it works
A door closer controls how a door shuts, which matters more than it sounds. Too fast and it slams. Too slow and it never latches. Meanwhile a fire door that fails to close does not contain anything. Urban Locksmith installs and adjusts commercial closers across Ottawa.
- Step 1
Door and frame checked
Because binding raises the force needed.
- Step 2
Closer fitted or serviced
Correct size for door weight and width.
- Step 3
Three settings adjusted
Sweep, latch speed and backcheck.
- Step 4
Fire doors verified
Closed and latched, every time.
What a closer is actually doing
A closer manages two separate phases: the sweep across most of the arc, and the latch speed in the final few degrees. Consequently a door can close gently yet still latch firmly. Furthermore, backcheck prevents the door slamming into a wall when thrown open. Therefore adjusting a closer means setting three things, not turning one screw.
Fire doors must close every time
A fire door only works when it is shut and latched. Consequently a closer that leaves it standing ajar defeats the entire purpose. Moreover propping fire doors open with wedges is common and seriously unsafe. Therefore if a door is being propped, the honest answer is usually a hold-open device linked to the alarm rather than a stronger closer.
Typical starting price
Quoted
Only with a hold-open device linked to the alarm.
Accessibility and closing force
A closer stiff enough to latch reliably can be too heavy for some users to open. Consequently there is a genuine tension between latching and accessibility. Therefore the answer is usually adjusting the door and frame so less force is needed, rather than winding the closer down until it stops latching. Additionally, low-energy operators solve it entirely where budget allows.
Signs a closer needs attention
Oil on the door or the closer body means the seals have gone, and that closer is finished. Similarly a door that slams has lost its latch-speed control. Meanwhile one that stops short needs adjustment or has a worn arm. Consequently most closers give clear warning. Therefore a quick annual check prevents both slamming damage and non-latching fire doors.
Questions about commercial door closers
Our fire door does not close fully. Is that serious?
Yes. Because a fire door only works when shut and latched.
Can you stop our door slamming?
Yes, by adjusting latch speed and backcheck.
The closer is leaking oil. Can it be fixed?
No. Once the seals fail the unit needs replacing.
Can a closer be too heavy?
Yes, and that is an accessibility problem. Consequently we adjust the door rather than overpowering it.
Can we prop the fire door open legally?
Only with a hold-open device linked to the alarm.
More commercial services
Advice on this
Where we cover
Across Ottawa and every community within an hour’s drive — 47 areas in total, from downtown out to Kanata, Barrhaven, Carleton Place, Kemptville and Rockland. You get an honest arrival window on the phone rather than a number chosen to win the booking.